亚洲一区在线
  • <table id="qq4qq"></table>
  • 當前位置: 網站首頁 > 產品展示 > 銅基釬料
    銅基釬料
    銅基釬料HL811

    銅基釬料HL811

    • 產品簡介:

      我公司的HL105、HL801等銅鋅釬料,浸潤性好、延伸率大、接頭剪切強度和抗拉強度高。適用于硬質合金刀具和釬頭、釬具、截齒等的釬焊。釬焊產品使用壽命長,能承受大的沖擊載荷和疲勞載荷...

    產品說明:
    1 銅鋅釬料
    1.1 使用說明
    我公司的HL105、HL801等銅鋅釬料,浸潤性好、延伸率大、接頭剪切強度和抗拉強度高。適用于硬質合金刀具和釬頭、釬具、截齒等的釬焊。釬焊產品使用壽命長,能承受大的沖擊載荷和疲勞載荷。
    銅鋅釬料可采用浸漬釬焊、感應釬焊、氣體火焰釬焊、爐中釬焊等工藝方法,釬焊前須對母材表面進行清除氧化膜、油脂、塵物處理,并充分預熱。
    感應釬焊時,釬料和釬劑要在裝配前安置好,切忌使釬料呈封閉環,防止釬料本身產生感應電流而過早熔化產生虛焊、缺焊。
    鹽浴浸沾釬焊應定期對鹽浴液脫氧并予以調整成分。
    Copper base braze welding material
    1 Cu-Zn braze welding material
    1.1 Guideline
    Cu-Zn braze welding material HL105 and HL801 have good invasion property, extensibility property, shear strength property of joint and strength of extension. They can be used for braze welding of cemented carbide tools, drilling bits and bits. These bits can get long working life, better impact load and fatigue load. 
    Cu-Zn braze welding materials can use techniques such as dip brazing, induction brazing, flame brazing and furnace brazing, the matrix should be clean up and pre-heating before welding. 
    Braze welding materials and brazing flux should in place before induction brazing, the braze welding materials must avoid closed hoop in case of generate inductive current to cause quality problems. 
    Salt-bath brazing techinque should deoxidize the salt liquid and make ajustment for composition.
    1.2 型號、代號、熔化溫度、化學成分
    牌號 企業代號 熔化溫度 化學成分(%)
    Cu Mn Zn Co 雜質總量(≤)
    BCu58ZnMn HL105 890-950℃ 57-59 3.5-4.5 余量 0.5
    BCu57ZnMnCo HL801 890-930℃ 55-57 3.5-4.5 余量 1.5-2.5 0.5
    BCu58ZnMnCo HL811 890-920℃ 57-59 3.5-4.5 余量 0.8-1.5 0.5
    1.2 Grade, code, melting temprature and chemical composition.
    Grade Code Melting temprature Chemical composition(%)
    Cu Mn Zn Co Impurity (≤)
    BCu58ZnMn HL105 890-950℃ 57-59 3.5-4.5 Surplus 0.5
    BCu57ZnMnCo HL801 890-930℃ 55-57 3.5-4.5 Surplus 1.5-2.5 0.5
    BCu58ZnMnCo HL811 890-920℃ 57-59 3.5-4.5 Surplus 0.8-1.5 0.5
    1.3 供應規格 絲狀:Φ1.6~Φ6.0×1000mm 片狀:L×W×(δ0.1~δ5)mm,長L、寬W根據用戶要求。 可供圓片、V形、弧形、四邊形、多邊形等各種形狀,規格。 1.3 Specification
    Filament: Φ1.6~Φ6.0×1000mm
    Lamella: L×W×(δ0.1~δ5)mm, the L and W according to the client’s request.
    Disk, V-shape, Arc, quadrangle, polygon, etc.
    2銅磷釬料和銅銀磷釬料
    2.1 使用說明
    銅磷釬料和銅銀磷釬料適用于氣體火焰釬焊、感應釬焊、爐內釬焊、電阻釬焊和浸漬釬焊等工藝方法。
    化學成分按GB/T6418-1993標準執行,可供應雙方協議認可的其它成分的釬料。
    2.Copper-phosphorus base braze welding material and Copper-silver-phosphorus base braze welding material. 
    2.1 Guideline 
    Copper-phosphorus base braze welding material and Copper-silver-phosphorus base braze welding material can used for flame brazing, induction brazing, furnace brazing, resistance brazing, dip brazing. 
    Chemical composition according to GB/T6418-1993 and also according to client’s request.
    2.2 技術要求:表(1)銅磷釬焊
    產品型號 化學成分 熔點(℃) 規格 特性與用途
    Cu P Sb Sn Ni 雜質總量 固相線 液相線
    BCu93P 余量 6.8-7.5 ≤0.10 710 790 條、絲、環、扁 流動性能好,適用于空調電機、儀表行業銅與銅合金釬焊
    BCu92SbP 5.8-6.7 1.5-2.5 0.4-1.2 720 800 條、絲 有較好的塑性,適用于銅與銅合金的釬焊,特別適用于電阻釬焊
    BCu86PSn 5.8-6.6 6.5-7.0 620 660 條、絲 熔點低,流動性好,適用于焊接電機,電器產品中的銅及銅合金
    BCu90SnP 0.5-1.8 8.5-10 930 980 絲、環 熔點低,流動性好,可部分代替銀釬料
    2.2 Technical Requirements: Tab (1) Copper-phosphorus base braze welding material
    Grade Chemical composition Melting temprature(℃) Specification Properties and application
    Cu P Sb Sn Ni Impurity Solidus Liquidus
    BCu93P Surplus 6.8-7.5 ≤0.10 710 790 Strip, filament, round, flat Good fluidity, used for electrical machine in air-conditon, copper and copper alloy braze welding in instrument
    BCu92SbP 5.8-6.7 1.5-2.5 0.4-1.2 720 800 strip, filament Good plasticity, used for copper and copper alloy braze welding, resistance brazing.
    BCu86PSn 5.8-6.6 6.5-7.0 620 660 strip, filament Low melting temprature, good fluidity; used for welding electrical machine and the copper alloy in electric appliance
    BCu90SnP 0.5-1.8 8.5-10 930 980 filament, round Low melting temprature, good fluidity, replaced some silver braze welding materials.
    表(2)銅銀磷釬料
    產品型號 化學成分 熔點(℃) 規格 特性與用途
    Cu Ag P 雜質總量 Zn 固相線 液相線
    BCu91PAg 余量 1.8-2.2 6.6-7.3 ≤0.1 645 790 絲、環、扁 工藝性、流動性好,適用于空調予置環及冰箱電機行業銅及合金釬焊
    BCu90PAg 2.8-3.2 6.6-7.3 645 790 絲、環、扁 工藝性、流動性好,適用于空調予置環及冰箱電機行業銅及合金釬焊
    BCu89PAg 4.8-5.2 6.3-7.0 645 810 絲、環、扁 在釬焊溫度下有極好的流動性,能滲入極小間隙中
    BCu88PAg 5.8-6.2 6.3-7.0 645 810 絲、環、扁 工藝性好,適用于釬焊電機,儀表眼鏡行業中的銅及銅合金
    BCu80PAg 14.5-15.5 4.8-5.3 645 815 絲、環、扁 接頭塑性,導電性明顯提高,焊接裝配要求不高。適用于承受較小振動載荷的銅及銅合金工件釬焊
    Tab(2) Copper-silver-phosphorus base braze welding material
    Grade Chemical coposition Melting temprature(℃) Specification Properties and application
    Cu Ag P Impurity Zn Solidus Liquidus
    BCu91PAg Surplus 1.8-2.2 6.6-7.3 ≤0.1 645 790 filament, round, flat Good manufacturability and good fluidity, used for copper and copper alloy braze weling in air-condition and refrigerator
    BCu90PAg 2.8-3.2 6.6-7.3 645 790 filament, round, flat Good manufacturability and good fluidity, used for copper and copper alloy braze weling in air-condition and refrigerator
    BCu89PAg 4.8-5.2 6.3-7.0 645 810 filament, round, flat Good fluidity and can permeate to small slit
    BCu88PAg 5.8-6.2 6.3-7.0 645 810 filament, round, flat Good manufacturability, used for electrical machine in braze welding, copper and copper alloy in instrument and glasses
    BCu80PAg 14.5-15.5 4.8-5.3 645 815 filament, round, flat Good electroconductibility and Good plasticity of the joint, low request of welding. Can used for copper and copper alloy braze welding to bear low vibration load.
     
    分享到:
    亚洲一区在线
  • <table id="qq4qq"></table>
  • 亚洲视频在线观看| 国产精品久久久久久| 国产精品久久久| 久久91亚洲精品中文字幕奶水| 久久久久精品无码三级| 国产99久久久国产精品电影免费| 中文国产字幕在线高清| 欧美日韩亚洲| 最近中文字幕高清中文视频| 999国产精品无码久久| 国产精品久久久久久无码专区| 精品中文无码少妇Av毛片免费| 三级网站午夜三级| 国产免国产免费| 中文字幕人妻熟人妻熟丝祙美| 91人妻久久久精品99系列|yww83 蜜臀av夜夜澡人人爽人人|u2y694 在线中文字幕欧美|yuu94 青青在线视频|yyw604 人妻久久久一区二区三区|3wy594 久久久久精品|uu3751 最近最新高清中文字幕免费大全|uuu515 国产午夜无码精品免费看性色|w3w288 色狠狠色噜噜AV天堂一区|uyu333 自拍偷自拍亚洲精品熟妇人|3uu154 欧美日韩亚洲|wu1314 熟妇人妻va精品中文字幕|yyw155 国产精品影院|u1y335 丰满少妇又爽又紧又丰满在线观|wwu759 国产91在线 | 中日|22u293 天堂网av|ywu380